![[Main Page]](/modules/mediawiki/images/mediawiki.png)
| Revision as of 14:38, 17 September 2014 (edit) pzebelloni (Talk | contribs) (→User Interface) ← Previous diff |
Revision as of 14:39, 17 September 2014 (edit) pzebelloni (Talk | contribs) (→Network Diagnostics) Next diff → |
||
Line 39: |
Line 39: | ||
| === Network Diagnostics === | === Network Diagnostics === | ||
| - | LED color and blinks count report the radio signal levels. | + | LED color and blinks report the radio signal levels. |
| {| style="border-spacing:0;" | {| style="border-spacing:0;" | ||
Revision as of 14:39, 17 September 2014
User Interface
Just one 2-colors LED and a Reed Switch provide a user interface.
The commands are given by a magnet to be approached the reed contact: the number of blinks defines the command itself. Just found the command you want, move the magnet.
| LED
| Blinks
| Command
|
|---|---|---|
| ORANGE | 1 | Show status. The LED blinks according to the module network link status for 10 seconds. See Network diagnostics. |
| ORANGE | 2 | Test mode. The device starts a test session, sending test frames to the Base Station every 5 seconds and the LED blinks according to the module network link status. See Network diagnostics. The module exits from test mode after 120 seconds. Show Status command stops the test procedure. |
| ORANGE | 3 | Enroll. The network enroll procedure starts. Command is valid only if the node is not enrolled yet. After the command two leds blink accordingly to the module network link status. |
| ORANGE | 4 | Stop. The device stops any network activity, putting hardware in a deep-sleep state. |
| ORANGE | 5 | Factory Default. Restore the factory default parameters. |
Network Diagnostics
LED color and blinks report the radio signal levels.
| LED
| Blinks
| Command
|
|---|---|---|
| GREEN | 1 to 5 | Good. Above -90 [dBm]. More blinks, better signal. |
| ORANGE | 1 to 5 | Weak. Below -90 [dBm]. More blinks, better signal, but GREEN is better. |
| RED | 1 long (2 [s]) | Off-Line. Node is enrolled but not synchronized on the network. |
| RED | 1 | Not Enrolled. Node is not (yet) enrolled. |